Lattice Lace Swirl Hat on Round Loom

It’s been a while since I used a round loom to make a hat, so I wanted to do something a little lacy and special.  I have been working this lattice lace stitch in cotton for other projects, but I wasn’t sure how to make it work in the round.  I am rather pleased with the results.  I call this my lattice lace swirl hat.

Lattice Lace Swirl Hat

Using my 34-peg round loom and my treasured assistant, Miranda the model head, I devised a pattern that uses only basic K2tog, purl and knit stitches to create the hat.  Because this is a large gauge round loom, you need bulky yarn or two strands of worsted weight yarn. I used two strands of Red Heart Super Saver Yarn in Buff.

Because I wanted the  swirl effect, there is a little hitch to row 3, but once you learn to do it, it’s very easy.  The key is to keep track of which row you are on, or your lattice could end up going the wrong way!

How to make the Lattice Lace Swirl Hat:

Cast on 34 pegs, we are knitting in the round.

Ribbing - K1, P1 for 4 rows

Pattern:

Row 1 - *yo, K2tog, repeat from * all the way around the loom, ending with K2tog

Row 2 - knit all 34 pegs

Row 3 - *k2tog, yo, repeat from * all the way around the loom, ending with yo (see more below)

Row 4 - knit all 34 pegs

Row 3 Instructions: In order to keep the swirl, the k2tog has to be done by moving the loop from peg 34 to peg 1.  Peg 34 will be the ending yarn over for that row.   Any stitch that was a yo the last time, will not ever be moved.  I like to think of the pattern like a tree, with one thick trunk-like swirl and lots of little branches. It is always the loop that is at the top of the trunk that gets moved over in the k2tog.  This way the lace is always moving right, and seems to swirl into the crown)

I moved all the loops for the K2togs, then e-wrapped the pegs with loops, and yarn over in front of the empty pegs, then knit off the pegs with loops.  My way of doing the rows quickly.

Row 3 moving loop from peg 34 to peg 1

Repeat pattern for desired length.  I use Miranda to help me figure that out, as she models the hat as I go.  My pattern length ended up being 4 inches. 

Crown

Knit 4 rows

Decrease by k2tog, with no yarn over.  Move loop from peg 1 to peg 2, move loop from peg 3 to peg 4, etc., all around the loom. You will have 17 pegs with two loops each.  Now wrap and knit only those pegs with loops.  Knit 1 more row on 17 pegs.

Cut yarn leaving a long tail.  Thread tail end through yarn needle and thread yarn through the loop on each peg all around the loom, lifting the loops off the pegs as you go.  Pull yarn tight, to form crown and close up the top of the hat.  Tie off and weave in ends.

Lattice Lace Swirl Hat in Navy

Knitting a Sock on the Round Loom

The first thing I learned to make on my round loom was a sock. A pair of socks is still the nicest gift you can make with a large-gauge round loom and even learning how to do the heel and the toe is not too hard and becomes easy with practice.

Like many loomers, I started with a set of large-gauge round looms. I bought a set of the Darice looms from Amazon.  Even though you  need bulky yarn or to use two strands of yarn at once, there are so many different things you can do with them.  For socks, I use the small, 24 peg loom and two strands of worsted weight yarn. These socks will be bulky and thick, so they are not suitable for wearing with shoes.  They would be just the thing with boots or for padding about on cold floors.  They are also really soft and cozy on your feet.

Since we will be making these with a turned up cuff, it doesn't matter how you do your cast on, the first row will be incorporated into the ankle of the sock.

Cast on all 24 pegs, we will knit in the round. This pattern uses the e-wrap method throughout.


Knit 14 rounds.

Now form the cuff by pulling the first row (the bottom row of your knitting) up to the pegs and with your hook, place each stitch from your first row over the corresponding peg, over the loops that are on the pegs, so that there are now two loops on each peg.

 All the pegs will have two loops when you are done turning up the first row.  Now pull the bottom loop over the top loop so there is just one loop on each peg. A nice trick is to tuck the tail of yarn from the first row into the cuff so it is hidden neatly.

Knit 7 rows.


Turning the heel - The heel will be worked on exactly half the peg


Increase
s. First we decrease, then we increase.

Decrease
Knit pegs 1 - 12.
Knit back from peg 12 to peg 2.
Wrap peg 1 without knitting, knit peg 2 - 11.
Wrap peg 12 without knitting, knit pegs 11 to 3.
Wrap peg 2 without knitting, knit pegs 3 to 10.
Wrap peg 11 without knitting, knit pegs 10 to 4.
Wrap peg 3 without knitting, knit pegs 4 to 9.
Wrap peg 10 without knitting, knit pegs 9 to 5.
Wrap peg 4 without knitting, knit pegs 5 to 8.
Wrap peg 9 without knitting, knit pegs 8 to 5.


Pegs 1 - 4  and pegs 9 - 12 will have two loops each.  Pegs 5,6,7,and 8 will have one loop each. 4 double loop pegs, 4 single loop pegs, then 4 double loop pegs.

Wrapped but not knitted pegs on heel decrease

Increase
Your working yarn is now at peg 5,  Wrap peg 4.  Three loops on peg 4.  Knit the bottom two loops over the top loop one at a time - bottom loop first, then the middle loop. Continue wrapping and knitting pegs 5 through 8 normally. Wrap peg 9, three loops on peg 9.  Knit bottom loops over the top loop, one at a time, bottom loop first. Knit back to peg 4.  Now wrap peg 3, three loops on peg 3 and knit the bottom two loops over the top loop one at a time as previously instructed.

Continue to knit back and forth, increasing one peg on each row as above until you have three loops on Peg 1. Knit the bottom two loops over the top, one at a time, bottom loop first.

Right at the corners of the heel, you may see that there are "holes".  You can fix this by pulling the back loop of the stitch on peg 12 over and place it on peg 13, then knit the bottom loop over the top.  Do the same with the back loop of the stitch on peg 1 and place it on peg 24, then knit the bottom loop over the top.

Now, we continue to knit in the round as usual. The heel is done!

Sock Body
Continue to knit in the round until the sock is about 1 1/2 inches shorter than the total length you desire. About 5 inches is average for an adult sock.

Toe
For the toe, simply create it using the same method of decrease and increase as we used for the heel.   So, repeat the heel instructions.  However, when you have completed the toe, do not continue to knit in the round.  Bind off all 24 pegs. 

Finish by seaming the toe flap to the body of the sock. 

Adorable Adult Booties Pattern for the Loom

I just love how quickly these booties worked up, and how simple they are.  There's no turning heels here, just a basic pattern in the round with some easy-to-do decreases.

These are made on the KB all-in-one loom.  Each slipper bootie is about 8 inches long, but they stretch to fit my size 10 feet just fine.  They are pretty much one-size-fits-all.

 Using the five peg spacers, adjust the loom so that you have 60 pegs to knit in the round. 

How to knit the Decrease  Rows
Decrease one stitch on either side of the slider 5 peg spacer.  This is going to be done by moving the loop on the pegs that are lined up with the five peg slider piece to the pegs directly to the left on one side and to the right on the other.  In other words, there will be a peg on either side of the loom with two loops, and the pegs next to the slider will now be empty.

As I am knitting counter-clockwise, another way to explain this is that I am moving the loop from peg 25 and placing it on peg 24, then moving the loop from peg 31 to peg 32 on my first round.

Then push the slider pegs down one.  There are now 58 pegs in total. 

Decrease will be done the same way on each row they are called for, but I won't give the peg numbers.  They will always be done at the corner pegs, leaving the corner pegs empty and allowing you to adjust the slider so the total number of pegs decreases by two.

Pattern:

With your main color (A), cast on 60 pegs.  Leave a long tail for seaming the bottom.

With A, knit 8 rows.
Purl 1 row.

With contrast color (B), purl two rows.

Change color to A, knit one row.


*With A knit a decrease row.
Knit 1 row.

Repeat from * 7 times. 

With A knit a decrease row.

Change to contrast color B.

Knit 1 row.

*Knit a decrease row,  Knit one row.

Repeat from * 4 times.

Change yarn to main color A.

K1 P1 ribbing for three rows.

Bind off.

Seam the bottom.

I like to sew up the bottom seam while the bootie is still on the loom.